Name: Clean Living Pool and Spa
Address: 7495 W Azure Dr Suite 110, Las Vegas, NV, 89130, US
Telephone: (702) 539-3927

Are you looking for cost effective and efficient ways to drain your pool?

Well, you have come to the right place.

The summer season calls for a refreshing swim, and what better way to start than with a newly filled pool?

Why drain your pool?

Draining a pool can be a tedious, expensive task. But, you have to do it at least every 2-3 years to ensure your water is clean.

And there are numerous reasons why it's mandatory and should be done.

The reasons include:

For resetting the water:

In cases where your pool’s PH has been seriously imbalanced, you can consider the option of resetting the water.

The only way to maintain your pool’s chemical environment is by having an optimal circulation. But in time, you may need to drain the water to reset it.

For pool maintenance:

This is especially important if you need to fix a cracked tile at the bottom or for some necessary maintenance. Although you can maintain a pool while still having water in it, draining the swimming pool can help you ensure no problem is left behind.

When to Drain Your Pool

It is equally significant to know when to drain your pool. After you have concluded why you want to go ahead with it, figure out when to get the process started.

This could be when:

You are ready to pay for it:

Draining a pool can be costly - at the minimum, you’ll need to replenish a large volume of water. So, when you’re sure that you have got the bills covered, start the task.

You have got plenty of time:

The process doubtlessly requires an ample amount of time.

The draining process can last anywhere from eight to sixteen hours alone and of course the filling process can require more time.

It’s essential that you do your research and manage time effectively before you commence the task.

It’s bright and sunny

You want to drain your pool on a sunny day. If it's raining, you’re highly unlikely to get the work done.

So, watch out for the weather and look up the forecast a day or two before.

The chemical levels have settled:

Once the pool's chemical levels are down and the PH is neutral, we advise you to start draining the pool. You want to make sure that there aren’t too many chemicals.

The circulation system is prepped:

You want to turn off the automatic timer to ensure your pump does not turn on to let air in during the process.

Now, If you think you are ready to drain your pool after reading the above reasons and conditions, then check out these simple yet effective ways.

They will guide you to complete the task in no time.

We have listed the steps in the right order making it even more feasible for you to follow.

These include:

Installing a submersible pump
Draining the pool slowly
Removing the pump
Relieving the valves
Performing any necessary maintenance

Start today by following these 5 simple steps and drain your pool as safely as possible. So, let’s dive in and take a closer look at the tasks to be done.

Installing a submersible pump

The regular pump that you use will definitely get you going in draining the water. But, as soon as the water is removed from the pool, it will start collecting air leading to permanent damage.

Save yourself the hassle and rent a submersible pump to get the job done. That way you would not have to pay extra and will be able to get down to work in no time.

Start by pacing the submersible pump at the center of the pool and connect it to a long hose. The other end of the hose will be connected to the place where you want to drain the water by providing an outlet for the water to flow.

Remember to use a long power cord too that reaches right down to the bottom of the pool.

Draining the pool slowly

This is the most vital part of the process - in fact, it is your goal.

Turn on the pump and start draining slowly. It is important that you are present at the site while the process takes place so that you may take notice of the cords and hoses at all times.

Likewise, remember to switch onto salt water so that the chlorine in the pool is at the lowest level. You can achieve this through a salt water generator which is extremely useful in such situations.

Removing the pump

When you reach a level when the pump will no longer be shifting water out of the pool that is the time you want to remove the pump.

You should not ideally remove every possible inch of water out of the pool as it can disrupt the chemical balance of the pool.

When you have achieved this, move onto the next step.

Relieving the valves

When you’re done removing the pump, it’s time to relieve hydrostatic pressure on the underground water.

You can do so by relieving the valves.

Perform any necessary maintenance

You may have drained the pool for chemically balancing it for future use or any necessary maintenance. If you need to fix any cracks or paint the pool proceed to doing it now and follow that with refilling the pool within a week.

Painting a pool does not take much energy. However, it takes time and can seldom turn out to cost you a lot.

Now that we have done explaining, perform the above steps to get the desired outcome. When you are done with everything, take a plunge into that pool to relax and swim at your ease.